CNC Mill Operator - 2nd Shift

Cinnaminson, NJ
Full Time
Delva Tool & Machine
Entry Level

Machinist (I and II) - Second Shift

Also known as: CNC Operator · CNC Machine Operator · Milling Machinist · CNC Lathe Operator · Precision Machinist

We make parts that end up on aircraft and defense systems, and we hold tolerances that most shops never attempt. We need a reliable second-shift CNC operator to own a set of production Haas equipment and be fully running every part on that shift within 90 days.

Pay

$20.00 - $30.00/hr ($41,600 - $62,400/yr), based on experience and level. We hire at both Machinist I (entry level) and Machinist II (3+ years experience).

What You'll Own

  • Operate production Haas CNC mills and lathes on second shift, loading and unloading parts, monitoring cycles, and keeping output moving.
  • Follow traveler work instructions to produce conforming parts the first time, every time.
  • Measure your own work using calipers, micrometers, and gauges, and flag anything that doesn't look right before it becomes a problem downstream.
  • Deburr, clean, and prep finished parts so they're ready for inspection without a second trip back to you.
  • Keep your area clean, organized, and safe, because in an aerospace shop, housekeeping is not optional.
  • (Machinist II) Adjust offsets, swap tooling, troubleshoot dimensional drift, and help bring newer operators up to speed.

What Delva Brings

Delva Tool and Machine is an AS9100 Rev D certified precision shop in Cinnaminson, NJ, serving aerospace and defense customers. We hold tolerances to +/-0.0002" across aluminum, titanium, stainless, and tool steels. Our floor runs Vertical Mills, Lathes, Swiss Lathes, and Mazak 5-axis horizontals with robotic loaders and automated pallet systems. This is not a commodity job shop. The work requires genuine attention and skill, and it goes into programs that matter.

What You Bring

Must-have (Machinist I):

  • High school diploma, GED, trade or vocational certificate, or equivalent hands-on experience
  • Ability to read and follow written work instructions and travelers
  • Comfort using basic hand measurement tools (calipers, micrometers, gauges)
  • Reliable, second-shift availability (no exceptions for this role)
  • Attention to detail and willingness to ask questions rather than guess

Must-have (Machinist II, in addition to the above):

  • 3+ years of CNC machining experience in a production environment
  • Ability to read engineering drawings and GD&T callouts
  • Experience adjusting offsets, replacing tooling, and diagnosing common machining issues (tool wear, surface finish, dimensional drift)
  • Ability to perform and document in-process inspections

Nice to have (either level):

  • Experience on Haas CNC equipment specifically
  • Aerospace or defense shop background
  • Familiarity with AS9100 quality systems
  • Experience with aluminum, titanium, or exotic alloy materials

Benefits

  • Medical, dental, and vision insurance
  • 401(k) with company match
  • Paid time off
  • Stable, full-time schedule in a growing shop with real career ladder (Machinist I leads to Machinist II leads to Lead and Setup roles)

How to Apply

Apply directly through this posting. If you have a resume, attach it. If you don't, describe your machining experience in your application message: what machines you've run, what materials, and how long. We review every application and will reach out within a few business days.

We are a drug-free workplace / Equal Opportunity Employer and Prohibit Discrimination and Harassment of Any Kind: We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements, and individual experience and qualifications, without regard to a person's sexual orientation, gender identity, gender expression, religion, disability, race, creed, color, sex, age, national origin or ancestry, or any other status protected by the laws or regulations in the locations where we operate.

Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 07/31/2029
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*